Wind study for Potermic Pallejà solar panels.
Client: C-Solar
Project: Wind coefficient study for the CSwind E–W system
Location: Ripollet
Service: Wind studies for solar panels
Modeling of 5 panels arranged in an East–West configuration, tilted at 10°, sheltered by 2 perimeter parapets 1.4 m high, one at each end.
Result of the simulation with wind entering from the left side of the image. The arrows represent the wind vectors, and the colors indicate the pressure exerted by it.
Close-up view of the first three pairs of panels closest to the wind inlet.
Close-up view of the first pair of panels closest to the perimeter parapet that takes the impact of the wind.
Close-up view of the second and third pair of panels, where the streamlines near the panels can be seen moving from right to left in the image.
Close-up view of the fourth pair of panels. A portion of the flow near the panels can be seen moving from right to left in the image, while another portion follows the direction of the main incoming wind flow into the computational domain.
Close-up view of the fifth pair of panels, the ones closest to the parapet at the outlet end. The portion of the flow that manages to circulate through the panel area concentrates upward to exit above the parapet.
Do you need a safe, optimized, and certifiable structural analysis?
Request your technical quote and receive a response in less than 24 hours.
Spain
Carrer de Balmes, 243, 5 2 Sarrià-Sant Gervasi, 08006 Barcelona
Polígono Ind. Molí d’en Xec, Nave 2, 08291 Ripollet, Barcelona
+34 937 375 881